wb1023sab single arm lcd tv mount for tvs up to 23

TURN/TILT Suits LCD/TFT screens up to 23" in size and up to 15kg (33lbs). VESA75, VESA100

The product is BLACK.

This is a wall mount for LCD/TFT screens, with a SINGLE arm. It is an ideal for allowing TVs to turn Left / Right by up to 180 degrees, (90 degrees Left / 90 degress Right). It also tilts +-15 degrees where it attaches to the LCD TV/Monitor. The arm allows a reach of 22.5cm (9”) from the wall to enable space to allow the TV to turn.

The bracket has the benefit, that the Tilt angle can be fixed to prevent it from being adjusted, this is done with the use of an Allen key which is provided.

Wall fixings (Plastic wall plug/ 45mm screws) and the screws into the back of the TV are included. (VESA standard M4 & M5 suplied)

All mount-fittings are Allen Keys which are provided.

The wall fixing plate measures 43mm x 150mm, The wall-plate is secures to the wall by 2 x 45mm bolts with plastic wall plugs.

Tools required to mount this bracket : - Spirit Level, 3.8mm Drill Bit for wooden walls, 10mm Drill Bit for Masonry Walls and a Phillips screwdriver.

This bracket is RoHS Safety Approved

Will this bracket fit my TV?

Your TV must weigh less than 15kg and have a screen diameter less than 23"

On the back-plate of the TV there must be 4 threaded screw-holes, set out in a square, spaced either 75 x 75mm or 100 x 100mm. No other mounting screw-hole spacings can be used with this bracket.

Can I use this mount on my wall type?

This bracket is ideal for brick, concrete, other masonry and wooden walls.

This bracket can be mounted on to plasterboard walls, assuming that it is fixed to the wooden stud-work supporting the plasterboard. We do not recommend that this bracket is attached solely to the plasterboard.

Warranty

This manufacturer offers a 5 year Warranty on all of it's products, this covers defects in materials and workmanship