wbb1032sab single arm mount for tvs up to 32

TILT / TURN Suits LCD/TFT screens up to 32" in size and up to 25kg (55lbs). VESA75, VESA100, VESA100x 200, VESA200

The product is BLACK.

This is a SINGLE arm wall mount for LCD/TFT screens, with a TILT and TURN action, ideal for mounting LCD TVs to a wall either at eye level or above eye level. When pushed-back to the wall the TV can be just 2.5” from the wall.

When fully extended, the arm has a maximum length of 235mm (9.5”)

The bracket has the benefit, that the TILT angle can be fixed to prevent it from being adjusted, this is done with the use of an Allen key which is provided.

Wall fixings (Plastic wall plug & 3 x 45mm wall bolts) and the screws into the back of the TV are included. (VESA standard M4, M5 & M6 suplied)

The wall fixing plate measures 42mm(wide ) x 95mm (high), The wall-plate is secures to the wall by 3 x 45mm screws with plastic wall plugs.

Tools required to mount this bracket : - Spirit Level, 3.8mm Drill Bit for wooden walls, 10mm Drill Bit for Masonry Walls and a Phillips screwdriver

This bracket is RoHS Safety Approved

Will this bracket fit my TV?

Your TV must weigh less than 25kg and have a screen diameter less than 32"

On the back-plate of the TV there must be 4 threaded screw-holes, set out in a square, spaced as follows :-

75 x 75mm
100 x 100mm
120(w) x 180mm(h)
100(w) x 200mm(h)
180(w) x 120mm(h)
200(w) x 100mm(h)
200 x 200mm

No other mounting screw-hole spacings can be used with this bracket.

Can I use this mount on my wall type?

This bracket is ideal for brick, concrete, other masonry and wooden walls.

This bracket can be mounted on to plasterboard walls, assuming that it is fixed to the wooden stud-work supporting the plasterboard. We do not recommend that this bracket is attached solely to the plasterboard.

Warranty

This manufacturer offers a 5 year Warranty on all of it's products, this covers defects in materials and workmanship.